How do I setup 2 wireless routers?

Place both of your routers and run Ethernet cable between the two routers. Finally, connect the routers, Plug one end of the Ethernet cable into any LAN port of the primary router, then plug the other end of the cable into the LAN port on the back of the second router to complete the process.

How do I connect a wireless router to another router?


  1. Step 1:First, check whether the devices are compatible.
  2. Step 2:Next, to create a distinct wireless network within the routers, one of the routers must have a ‘Bridge’ ‘Extender’ or ‘Repeater’ mode capabilities.
  3. Step 3:Now, place both the routers next to the computer.

Can you use two routers on same network?

Yes, it is possible to use two (or even more than two) routers on the same home network. The benefits of a two-router network include: A second router provides more open Ethernet ports so that additional computers can join the network.

Can you use router as WiFi extender?

By turning an old router into a Wi-Fi extender, you can grab the Wi-Fi data signal out of thin air and retransmit it to other parts of the house. It’s easy to reconfigure an old router into an extender so that the device grabs a strong Wi-Fi signal and sends out a fresh stream of data to previously unconnected areas.

How can I use my old router as a WiFi extender?

Configure your repeater router

  1. Connect the ethernet cable to the router you want to use as your wi-fi booster and power it on.
  2. In the wireless repeater settings, change it from ‘Access Point (AP)’ to the ‘repeater’ option (for some routers you might have to create a wireless bridge).

Can I use a router as a WiFi antenna?

Most wireless routers use an omnidirectional antenna to broadcast their wireless signals in all directions. By connecting a directional antenna, you eliminate this wasted signal and focus the limited power in the direction you need it most, which effectively increases the signal strength in that direction.

How do I add a second router to my Network?

Connect a Second Wired Router. A second (new) router that doesn’t have wireless capability must be connected to the first (existing) router with an Ethernet cable. Plug one end of the cable into the new router’s uplink port (sometimes labeled WAN or Internet). Plug the other end into any free port on the first router other than its uplink port.

How do you set up two routers?

Using Ethernet Determine which router will be the main router. Determine which router will be the secondary router. Place both routers near your computer. Decide between a LAN-to-LAN or LAN-to-WAN connection. Perform the initial router setup. Configure your router. Change the DHCP settings. Configure the second router.

Can two routers be used on the same home network?

Yes, it is possible to use two (or even more than two) routers on the same home network. The benefits of a two-router network include: Support for more wired devices: If your first router is the wired Ethernet kind, it supports only a limited number of connected devices (typically only four or five).

Can you connect two routers together?

Connecting two home routers over wireless is also possible, but in most configurations, the second router can only function as a wireless access point instead of a router. The second router must be set up in client mode to utilize its full routing functionality, a mode that many home routers don’t support.