How much does a Ford 340B weigh?
The tractor was 67.6 inches wide and 55 inches tall at the engine cover. The 340B’s ground clearance was 14 inches. The turning radius was 11 inches and the overall weight without the front loader and backhoe was 4,775 lbs.
How much does a Ford 340 backhoe weigh?
Ford 340A
| Dimensions & Tires | |
|---|---|
| Wheelbase | 81 inches 205 cm |
| Weight | 11.500 to 9100 pounds |
| Full dimensions and tires … |
How do you check hydraulic fluid on a Ford 340B tractor?
The sight port to see the level of the hydraulic fluid (fluid for hydraulics is combined with rear axle fluid) is located by your right heel when sitting on the tractor.
How much does a Ford 3400 tractor weight?
Ford 3400
| Dimensions & Tires | |
|---|---|
| Wheelbase | 80.3 inches 203 cm |
| Weight | 3576 to 3723 pounds |
| Rear tire | 14.9-24 |
| Full dimensions and tires … |
How many horsepower is a Ford 340B?
Ford 340B
| Ford 340B Power | |
|---|---|
| Engine (gross) | 52 hp 38.8 kW |
| Engine | 48 hp 35.8 kW |
| PTO (claimed) | 44 hp 32.8 kW |
Where is the hydraulic filter on a Ford 3000?
It must be at the back od the “lift” or hitch cover. There’s a paper filter thing that often sits underneath the suction screen. Make sure you pull that suction screen and clean the surrounding area. Clean it thoroughly before changing the hydraulic filter.
How many horsepower is a Ford 3600 tractor?
Ford 3600
| Ford 3600 Power | |
|---|---|
| Engine (gross): | 48 hp 35.8 kW |
| Engine (net): | 45 hp 33.6 kW |
| Drawbar (claimed): | 34 hp 25.4 kW |
| PTO (claimed): | 40 hp 29.8 kW |
How do you read a Ford tractor model number?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.
How do you decode a Ford VIN number?
How to Decode a Ford VIN?
- 1 = Country of manufacture (United States)
- F = Manufacturer (Ford)
- D = Vehicle Type (Incomplete Vehicle)
- X = Restraint Type.
- F46 = Model (Ford F-Series, F-450, Regular Cab, 2WD)
- S = Engine Type (6.8 SOHC SEFI V10; Gasoline 275HP)
- 1 = Security Code.
- 2 = Model Year (2002)
How do I know what Ford tractor I have?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.
What are the specs of a Ford 340?
Ford 340 Specs 1 340A Power. The 340A was equipped with a three-cylinder diesel engine displacing 2.9 liters (175 cubic inches). 2 340A Size. The Ford 340A featured an 81-inch wheelbase and overall length of 122 inches without loader or backhoe. 3 340B Power. 4 340B Size. 5 340A and 340B Attachments.
When did the Ford 340B tractor come out?
The Ford Motor Company produced its 340A and 340B industrial tractors throughout most of the 1980s. The 340A was produced in 1983 and the 340B’s production ran from 1984 to 1987.
Where is the attachment plate on a Ford 340?
Attachment details Data plate inside the right hood panel. Stamped into casting behind starter. ©2000-2020 – TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur.
Where is the data plate on a 340?
all 340 attachments Data plate inside the right hood panel. Stamped into casting behind starter. Open operator station. Optional two- or four-post ROPS. With optional gear pump. Steering cap.: