What frequencies do pagers use?
Background. Commercial paging operates in the 35-36, 43-44, 152-159, and 454-460 MHz bands (sometimes referred to as the “Lower Band”) and the 929 and 931 MHz bands (sometimes referred to as the “Upper Band”) (refer to band plan).
How do I find police radio frequencies?
One way to find frequencies is by asking a retailer of police scanners. Local directories also help you find the information you need, since the frequency depends on which county or state you live in. But by far, the quickest and most accurate route is through the internet.
What is Pocsag transmitter?
The PIA POCSAG transmitter in VHF or UHF range transmits call- or alarm- signals from the Hytera or icom mobile radio to corresponding pager. This can take the form of an individual text message from the mobile radio system or a notification about an incoming call on the radio device.
What is a pager CAP code?
“Cap Code” stands for Channel Access Protocol code, which is the unique ID code assigned to a particular pager. When a pager detects its own cap code within a POCSAG address frame, it will alert the. user with a beep, tone, or vibration.
Do pagers still work?
With over 2 million pagers in use today (as of 2021), Let us be the first to tell you that Pagers are not only alive and well, but are THE backup communication source relied upon by people who absolutely have to be accessible.
How do you say I love you on a pager?
143: I Love You.
Can you call a pager from a cell phone?
To call a pager, you must call from a phone line, and dial the pager number. A voice recorded message asks you to dial the number for the pager recipient to call back. Dial the pager number, and wait for the automated message.
Where is the POCSAG frequency used for paging?
The Belgium POCSAG is used for paging over the A.S.T.R.I.D. network: In Italy, the 26.225-26.935 MHz band (AM/FM, odd frequency steps) and 40.0125-40.0875 MHz (in 25 kHz steps) may be used for local pagers. These frequencies are often used for on-site hospital paging systems, including voice paging.
What are the frequencies of pagers in the UK?
In the UK most pager transmissions are in five bands at 26 MHz (local pagers, mainly hospital systems, POCSAG and voice) 49 MHz 138 MHz 153 to 153.5 MHz 454 MHz
Can a commercial pager be used for POCSAG?
Many used commercial pagers can be used for Amateur POCSAG but be careful when purchasing. Verify it is compatible with POCSAG protocol (not just FLEX) and the frequency, Baud and capcode can be set before you spend your money. Many old pagers cannot do 449 MHz.
Where can I find a quickstart guide for POCSAG?
Pocsag Quickstart Guide. POCSAG is a one-way pager protocol that is carried by DAPNET (Decentralized Amateur Paging Network) which was developed by German Amateurs. You can configure your Pi-Star hotspot to transmit these messages on the worldwide POCSAG frequency of 439.9875 MHz (or any other frequency you choose).