Will Mod Podge work on Mason jars?

You can use just about any Mod Podge formula with mason jars. Glass is shiny by nature, so Gloss is the most commonly used on mason jars for most people. However, you can always use the Matte or Satin formulas if you are looking for a bit of a different finish.

Can you use Mod Podge with glitter?

One option for sealing glitter with a decoupage medium is by mixing glitter directly into the Mod Podge! You can using any glitter thickness (chunky, fine, or ultra fine). Mix glitter with Mod Podge and brush it on to your project like paint.

Can I seal glitter with hairspray?

Sealing Glitter With Hairspray If glitter is falling from any of your clothes, you can use fabric glue to seal back the glitters to the fabric. Hairspray is also a quick option that can effectively work. Lay it on a clean surface and spray a layer of hairspray on the glitter that you want to seal.

Which Mod Podge is best for glass?

Mod Podge Gloss
Mod Podge Gloss works great on glass!

What glue is best for glass and glitter?

Glue: Mod-podge gloss glue works the best for this, however 3 parts of PVA glue mixed with 1 part water also works. There are many varieties of the mod-podge glue, including a dishwasher safe version, so it might be worth doing your research to see which works best for you.

How do you Mod Podge a Mason jar?

Here’s how you tint Mod Podge:

  1. Add some Mod Podge to a small container (a piece of Tupperware works great).
  2. Put a couple of drops of food coloring or paint into the Podge. Stir.
  3. Apply with a soft bristled brush, spouncers, or foam brush to a clean surface. You can also swirl it around on the inside of jars as well.

Does Hairspray seal glitter?

Sealing Glitter With Hairspray Hairspray tends to dry quite fast, so they are perfect for this method. It is a quick fix that seals glitter to the fabric. Lay it on a clean surface and spray a layer of hairspray on the glitter that you want to seal.

What is a good sealer for glitter?

If you are going to seal the glitter, use a very clear and glossy spray like Krylon Triple Thick Glaze, or a crystal clear liquid like Envirotex Lite. Both of these sealers will protect your glitter indoors and outdoors.

How to make a mason jar with mod Podge?

Twist, turn and roll the jar around until the entire inside is well coated with your Mod Podge mixture. Allow the excess to run off back into your bowl. Wipe any large globs off of the rim and turn upside down onto some paper towels so it will finish coating (with extra pooling on your paper towels).

How do you put Glitter in a mason jar?

As soon as you have put your Mod Podge on the glass, sprinkle your glitter on the jar, gently tap the excess glitter off and let it sit for five minutes or so. Remove your tape carefully. If you just want one swirl of glitter – you are done!

How to make a night light from a mason jar?

Instructions. 1 Mix a bit of food coloring with Mod Podge. Stir to combine. 2 Paint the inside of the mason jar with the Mod Podge mixture. 3 While the inside of the jar is still wet, sprinkle in the glitter. Let dry. 4 Add a tealight to the lid of the mason jar and screw on the base to display.

How do you put mod Podge on glass?

Don’t let the Mod Podge sit too long – this stuff can dry fast on glass. As soon as you have put your Mod Podge on the glass, sprinkle your glitter on the jar, gently tap the excess glitter off and let it sit for five minutes or so. Remove your tape carefully.