How do you program a RCA universal remote with a code?

  1. Power on the equipment you want to pair.
  2. Press and hold the Code Search button on the universal remote control until the light turns on.
  3. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).

How do you set a RCA universal remote to a TV?

Follow these easy steps:

  1. Manually turn on your TV.
  2. Aim your remote at the TV panel and press and hold the TV button.
  3. Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
  4. Press the Play or the Slow button on your remote for five seconds.

How do I program my 4 RCA universal remote?

Press and hold the device key you want to program. The POWER key illuminates While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time. The POWER key turns off. Wait until the remote’s POWER key comes on and stays on.

What is the code search button on RCA remote?

For a Remote With a Code Search Button. Turn on the device you want to control. If there’s a button on your RCA remote that says “Code Search” or “Set Up,” you can use this method to locate and program device codes. Start by turning on the device you want to control.

How do I reset my RCA remote control?

Hold the “1” button on the remote down for 60 seconds. Release the button and wait about 10 seconds. Repeat this step two to four times to clear the remote’s memory.

How do you connect a universal remote to a Samsung TV?

Using your Adapter’s remote, press and hold the PROG button until the LED on the remote turns on, then press the INFO button. The LED on the remote will blink slowly to show that it is now in pairing mode. Enter the 3-digit number that appears on your TV screen with the keys on your remote.

How to program an RCA Universal Remote using manual code?

Manually Entering a Code Locate the code for your device in the RCA Remote Code Finder. Entering a device code is the fastest way to program your RCA universal remote. Turn on the device you want to control. Press the power button on the device you want to control to switch it on. Point your remote at the device.

Can a RCA remote control a DVD player?

Start by powering on the device that you want to control (e.g., your DVD player, stereo receiver). You’ll only be able to use your RCA remote with devices that support remote control in the first place. If the device did not come with a remote, you likely won’t be able to use your RCA remote to control it.

How do you pair a universal remote to a DVR?

Power on the equipment you want to pair. Press and hold the Code Search button on the universal remote control until the light turns on. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).

Where can I find my universal remote code?

Entering a device code is the fastest way to program your RCA universal remote. The code for your device will vary depending on your model of RCA remote. In the RCA Remote Code Finder, select the model number of your remote control from the “Model” drop-down. You can find your model number printed on the bottom of your remote.