Is the Pontiac G6 a V6?
Depending on trim level, the G6 comes with one of four engines: a 2.4-liter inline four-cylinder, a 3.5-liter V6, a 3.6-liter V6, or a 3.9-liter V6. A four-speed automatic is standard with all engines but the 3.6, which gets a six-speed automatic.
Is the 3900 V6 a good engine?
the 3900 is an updated version of the 3.5l engine GM used in their cars. that series seems to be a very reliable engine. the older ones had intake gaskets that would leak quite often but there are no such problems with the 3900’s.
Are 3.5 V6 reliable?
Ford 3.5L V6 TiVCT engines are a great option for those who don’t need gobs of power, but simply want a reliable, efficient engine. With proper maintenance they’re known to make it beyond 200,000 miles without many serious issues.
How fast is a Pontiac G6 GXP?
Performance
| 0 – 100 kph | 6.2 s |
|---|---|
| 0 – 100 mph | 14.9 s |
| Est. 1/8 mile | 9.9 s @ 83.9 mph |
| 1/4 mile | 14.6 s @ 99.4 mph |
| Top speed | 233 kph (145 mph) |
What is a 3900 V6?
The GM 3900 V6 engine is also called the 3900 High-Value V6 and is part of the High Value engine series by GM. All of the engines in the High-Value series have 60-degree overhead valves. GM manufactured the 3900 V6 as a replacement for the GM 3800 V6.
What kind of engine does a Pontiac V-8 have?
The Pontiac V-8 was the power plant for a whole generation of muscle cars, including the legendary GTO and Firebird Trans Am from the late 60’s to early70’s. The renewed popularity of muscle cars has restored the interest of hobbyist rebuilding and modifying these engines.
How much horsepower does a Pontiac Fiero have?
While there are a number of simple and fairly inexpensive ways to improve the engine performance of your Fiero, you are ultimately limited to 190 horsepower with the stock intake plenum. If you want more power than this, then I recommend saving your money for a turbo or engine swap.
What can be done to improve the performance of a Pontiac?
Another improvement that can be made to the performance is increasing the gap of the spark plug to .060 from the stock .045. This can improve low-end torque and engine response at all rpms. In the words of Ray Paulk, “Ideally, you want a spark plug with low conductivity combined with a coil large enough to fire it over a relatively wide gap.”
What kind of engine does a Pontiac 400 have?
Reciprocating assemblies feature forged steel connecting rods, forged aluminum pistons, moly rings, and premium bearings. 400/428/455 engines feature a fully refurbished GM crankshaft. “Stroker” engines feature a forged steel, 4.25″ Scat crankshaft.