How do I reset my Acurite thermometer?
Hard Reset:
- Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
- Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button on the display for 20 seconds if applicable.
How do you reset the rain on Acurite weather station?
Please press the “RESET” button for 1 second to clear the display and start counting from 00.00IN or 000.0MM. To change the outdoor rain gauge batteries, you must press and hold the “RESET” button for 5 seconds on the indoor rain monitor and let it re-sync again.
How do I turn off the alarm on my Acurite weather station?
NOTE: To disable ALL alarms at once, press and HOLD the “ ” button for 10 seconds. You will automatically exit alarm SET MODE if no buttons are pressed for 10 seconds.
Why is my AcuRite weather station stopped working?
Hard Reset: Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button for 20 seconds if applicable.
Where is the reset button on my AcuRite weather station?
Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
How do I set the time and date on my AcuRite weather station?
Press and hold the “SET” button for 3 seconds: • The setting sequence is: Year > Month > Date > Hr > Min > 12/24 hr > DST on/off > Weather Offset > EXIT Settings • Press the “+” or “-” buttons on the back of the Receiver to set each function to the correct setting.
Where is the reset button on an Acurite weather station?