How do you reset the oil life on a Honda Civic?
Step 1: Turn your Civic ignition on without starting your engine or press the start button twice without touching the brake. Step 2: Press the Trip knob repeatedly until the Engine Oil Life percentage displays. Step 3: Press and hold the trip knob until the Engine Oil Life percentage starts to blink.
How do you reset the oil life on a 2007 Honda Civic?
Instructions:
- Turn the ignition to run (one position before starting engine).
- Press the SELECT/RESET knob until the engine oil life indicator is displayed.
- Press the SELECT/RESET knob for more than 10 seconds.
- Press the SELECT/RESET knob for more than 5 seconds.
How do I reset my oil life?
Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the wrench light on a Honda Civic?
Turn the power to the vehicle ON, but do not start the vehicle. Press the “Trip” stem button to toggle the selection to the wrench. Press and hold the “Trip” stem button for 10 seconds, then release it.
Which engine oil is best for Honda Civic 2008?
Make sure to use 5W-20 oil.
What oil does a 2008 Honda Civic use?
5W-20
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 3.7 quarts. w/ofAfter refill check oil level. 3.9 quarts (with filter)After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
How do you reset oil life?
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
Why is my oil light still on after oil change?
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
How do you change the oil on a Honda Civic?
After the oil is changed, the Civic’s oil status indicator needs to be reset. In most cases, your dealer will reset the indicator for you; however, you can reset it yourself at home without tools. Insert your key into the ignition, and turn it to the “On” position but do not start the engine.
When to reset the oil status indicator on a Honda Civic?
Newer Honda Civic models manufactured after 2005 are equipped with an engine oil life monitoring system. This system serves as a maintenance reminder and lets you know when to change your Civic’s oil. After the oil is changed, the Civic’s oil status indicator needs to be reset.
How do you reset the oil life on a Honda Accord?
Press and hold the “SEL” button for approximately 10 seconds or until the “Oil Life” display begins to blink. Release the button when the display blinks. Press and hold the “SEL” button for five seconds until the display flashes and the “Oil Life” display resets to 100 percent.
When does maintenance light come on on Honda Civic?
In tough driving conditions with a lot of stop-and-go traffic, the maintenance light will come on after about 6,000 miles, indicating 15% oil life remaining. Place a jack at the jacking point at the front passenger side on the pinch weld, the thicker metal part just behind the front wheel.