How do you program a Toyota Prius key fob?

Toyota Key Fob Programming Process

  1. Get into the driver’s seat of your Toyota.
  2. Turn your key in the ignition from “off” to “on.”
  3. Turn your key in the ignition from “off” to “on again within five seconds.
  4. Remove your key from the ignition.
  5. Within 40 seconds, close and open the driver’s door twice.

How do you program a 2010 Toyota key fob?

PRESS and HOLD the LOCK button and hold for 2 seconds. RELEASE. The vehicle will respond by cycling the locks from LOCK to UNLOCK to indicate successful programming of the remote. REPEAT Step 7 for any additional remotes to be programmed, including working ones.

Can you start a 2010 Prius without key fob?

If you hold the dead key fob very close to the start button the start button will be activated. You can then push the start button and the vehicle will start and run.

How do I remote start my 2010 Prius?

Remote Start Kit Options and Range

  1. Standard Kit. Remote Start works by pressing the lock button 3 times on your OEM key FOB.
  2. Long Range Remotes. Remote Start, Lock, and Unlock your vehicle with our Long Range Remote Kit.
  3. App Module.

Can I reprogram a used Toyota key fob?

Hi there. You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. Remove the battery cables from the vehicle, wait 30 seconds, then hook them back up (reset computer). Put the key in the ignition and turn the key to the ‘ON’ position.

How do you program a 2010 Toyota Corolla transponder key?

Locate the lock and unlock buttons on your keyless entry remote and hold them both down at the same time for a second and a half. Release both buttons and hold down the lock button for two seconds, until the door locks cycle once more. Your transponder key is now programmed.

Can you drive a Prius without the key?

6 Answers. No, it will not stop mid-ride. It will warn you the key is no longer in the car, but as long as you don’t turn it off, it will keep running until you run out of gas or the car battery dies.

Can you put remote start on a Prius?

Remote Start Ready systems use your vehicles existing remotes. Your vehicle starts by pressing the factory remote button 3 times. The RSR system integrates into your vehicle’s electrical system and uses your existing components to remote start your vehicle.

How do I program my 2011 Prius key fob?

Here are the steps:

  1. Bring working key into vehicle.
  2. Leave new key outside of vehicle, but have it readily available.
  3. Press power button twice to turn on vehicle.
  4. Disable antivirus protection on laptop (if applicable).
  5. Physically connect laptop (he used Windows XP) to car via MINI-VCI cable.

How can I program my Toyota Prius key fob?

Starting with Gen3, there is no chicken dance. The cheapest way to program a new key fob to work in your Prius is with the Toyota Techstream software. This is proprietary software that Toyota service technicians use to work on Toyota vehicles.

What are the programming instructions for a Toyota FOB?

Programming Instructions Remove the key out of the ignition cylinder. Keep driver’s door open and unlocked, while leaving all other doors closed. Within 5 seconds or less: – insert the key in the ignition and then pull the key out Within 40 seconds or less: – close and then open driver’s door Within 40 seconds or less:

What happens if your Toyota fob key is cut?

This programming method will work even if the key blade hasn’t been cut yet. If you accidentally ordered the wrong key, the key was incompatible, or security chip was defective – you still will be able to return the blank key. Otherwise, most sellers won’t refund your purchase if the key was already cut.

What’s the difference between BK and SK on a Prius?

Perhaps Prius ownership should be designated BK and SK, in the same manner years used to be designated BC and AD. BK is for all Gen II Prius models with black key fobs. SK is for those Prius models equipped with Smart Key System (SKS) functions. BK owners take heart: eBay and the Internet have made DIY fob replacement a reality.