What is SAE 660 bronze?

SAE 660 Bronze or C93200 as it also commonly known is a high-leaded tin/ bearing bronze. This Bronze has good hardness and strength qualities as well as good wear resistance, it also has excellent machining properties and anti-friction qualities.

What does bearing bronze mean?

Grade 932 Bearing Bronze is a high leaded tin bronze alloy. This bronze alloy is known for its excellent strength combined with excellent anti-friction qualities that make it very resistant to wear. It should be noted that Grade 932, 954, and 959 bronze are continuous cast bronze products.

Is bronze worth more than brass?

Bronze is a great metal to scrap and is always worth more than brass, but less then copper. Bronze generally consists of 90 percent copper and 10 percent zinc. Bronze is also known as red brass compared to yellow brass. For bronze to be priced differently than brass, it must contain 80-90% copper.

Should bronze bushings be greased?

SKF solid bronze bushings can be lubricated with either oil or grease. The lubricant not only improves the sliding properties, but also reduces wear and prevents corrosion. While oil is used in exceptional cases, solid bronze bushings are typically grease lubricated.

Which is better 932 bronze or SAE 660?

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It’s also known as SAE 660 and is often used for bearings, bushings, and thrust washers. Diameter is oversized to allow for finishing.

What kind of bearings are made of SAE 660?

It’s also known as SAE 660 and is often used for bearings, bushings, and thrust washers. Diameter is oversized to allow for finishing. These rods are precision ground for a tight diameter tolerance of ±0.0005″. Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002″.

What kind of bronze is used for bearings?

932 Bearing Bronze Tubes Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It’s also known as SAE 660 and is often used for bearings, bushings, and thrust washers. 932 Bearing Bronze Rods

What are the specifications of c93200 bearing bronze?

C93200 Bearing Bronze Specifications End Product Specification Centrifugal ASTM B271, SAE J462, J461 Continuous ASTM B505, SAE J461, J462 Ingot ASTM B30 Permanent SAE J461, J462