What size are #57 stone?

about ¾”
Crushed stone #57 refers to stone that is about ¾”. This is typically used for concrete mix, landscaping and drainage.

What size is #67 gravel?

67 stone is a limestone aggregate averaging 1/2″ in size.

Is 57 stone a compact?

Using compaction equipment, #57 stone will typically compact about one inch in vertical height, which is equivalent to about 8% settlement.

Why do they call it 57 stone?

The number “57” is a number that refers to the size sieve that was used to screen and sort the stone. It means that the stone was put through the #57 sieve which produces gravel stones of about 1” to 1.5” in size. It is used when the project calls for stone dust that mixes with the larger stone and settles well.

What are stone sizes?

Some of the more common stones and stone sizes and their uses follow:

  • Red Rock or Brick chips – Sizes range from 3/4″ to 1 1/2″.
  • Crushed gravel – Sizes range from 1/4″ to 3/4″.
  • River rock – Sizes range from 3/8″ to 2 1/2″.
  • White marble – Size range from 1/4″ to 1/2″.
  • Crushed limestone – Sizes range from 3/8″ to 3″.

What size is #2 gravel?

This primarily 1″ crushed, washed gravel with a top size of 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.

What size is number 4 gravel?

#4 Limestone Gravel Stone is a crushed angular Limestone aggregate. Sizes of #4 Stone range from 1 1/2″ to 2 1/2″.

What size is number 4 stone?

What size stone is best for driveway?

The ideal gravel size is around ¼”-1” and selecting gravel that is not too large and flat, or too large and roundish will ensure you better results and less issues and a better surface. Most commonly used is 57 Granite, Crusher run, Small pea gravel and even Alabama Path Stone.

What size rock is best for a driveway?

A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.

What is Type 3 stone?

It is a pure crushed stone, ranging in size from 40mm down to dust with a higher percentage of larger sized aggregate, but with a reduced (not zero) fines content. Type 3 is a sub-base similar to MOT Type 1 but with reduced fines to allow water to free drain as a permeable sub base.