How do I reset my brother TN?

HOW TO RESET A BROTHER TN-630 AND TN-660 CARTRIDGE?

  1. Open the front door of the toner compartment.
  2. The printer screen should read “The front cover is open”.
  3. Press the “Clear” key on the front panel of the printer.
  4. The printer will say: “Replace the drum?”

How do I reset my brother TN 730 printer?

Solution for Brother TN-730, 760, 770 toner reset :

  1. Press the “Back” and “GO” buttons at the same time, and hold for 1 to 2 seconds,
  2. When you have released 2 buttons, press the “Back” button again at once. The printer will go to the reset page.

How do I reset my brother TN 630 printer?

  1. Open front door.
  2. Turn off printer.
  3. While holding down the GO button, turn printer back on.
  4. When all four LEDs light up release GO button. All LEDs will turn off.
  5. Press the GO button 2 times.
  6. Press the GO button 5 times.
  7. Paper light will be blinking.
  8. At this point the toner end-of-life condition has been reset.

How do I reset my brother mfc 1810?

Reset Toner Brother MFC-1810 MFC-1910W

  1. Press the MENU button.
  2. Hit the down arrow until you see info on the display.
  3. Press the OK button.
  4. Hit the down arrow until you see reset drum.
  5. Press and hold the OK button until you see reset on the display.
  6. Press *, 1, 1.
  7. You should now see accepted on the display.

How do you reset the toner low on a Brother printer?

How to Reset Toner Low Message on Brother MFC-7340

  1. With your printer ON, open the front door (cover)
  2. Press Clear/Back Button once.
  3. Press *00 (*zero zero)
  4. The message on the display should now read Accepted.
  5. Close the front cover.
  6. Your toner is now reset.

How to reset your brother printer for your TN?

MFC-9460CDN and MFC-9560CDW printers: Open the front cover. The display should read, “ Cover Open .” Press the “Clear” button. “ Reset Menu” will appear on the LCD. Press the up or down arrow to select the toner cartridge you need to reset: After you have selected the right toner cartridge, press OK.

How to reset the brother machine to factory default settings?

1. Unplug the interface cable. 2. Press Menu. 3. Press ▲ or ▼ to display General Setup, then press OK. 4. Press ▲ or ▼ to display Reset, then press OK. 5. Press ▲ or ▼ to display Machine Reset, Network, All Settings, or Factory Reset. Press OK to choose the reset function you want to use. – To reset the settings, press ▲ and go to step 7.

How to reset a brother tn-630 and tn-660 cartridge?

1- Open the front door of the toner compartment. 2- The printer screen should read “The front cover is open”. 3- Press the “Clear” key on the front panel of the printer. 4- The printer will say: “Replace the drum?” 5- Do not press 1 here, but type “* 00” on the keyboard. Star zero zero zero.

How to reset a brother MFC toner counter?

How to Reset a Toner for Brother MFC Printers Open the front cover of the printer and press the CLEAR / BACK button. Press the following buttons on the keypad in this sequence, *, 0 and finally 0. Close the front cover.

By Tips