How much oil does my Suzuki Boulevard take?
It takes 10w40 oil and 3.2 qts for oil change only and 3.6 qts for oil and filter change.
What type of oil does a Suzuki Boulevard take?
Suzuki ECSTAR R9000 10W-40 Full Synthetic Oil Change Kit for Suzuki Boulevard C50 VL800 2005-2009.
How many quarts of oil does a Suzuki Boulevard M50 take?
Approximately 3.6 quarts of oil (only 3.2 if not changing the oil filter).
What kind of oil does a Suzuki Boulevard M50 take?
Compare with similar items
|This item Suzuki ECSTAR R9000 10W-40 Full Synthetic Oil Change Kit for Suzuki Boulevard M50 VZ800 2005-2009||Valvoline 4-Stroke Motorcycle Full Synthetic SAE 10W-40 Motor Oil 1 QT|
|Sold By||The D Zone||Amazon.com|
How do you check the oil on a Suzuki Boulevard?
The dipstick is located on the left side of the bike when you are sitting on it, tucked just under the cylinder. Wipe the oil off the dipstick with a rag. Reinsert the dipstick in the block without tightening it. Pull the dipstick out and check the oil level according to the webbed portion.
What kind of oil does a 2006 Suzuki Boulevard take?
20W-50 2006 Suzuki Boulevard C50 VL800 Engine Oil.
What oil does a Suzuki C50 use?
The Right Synthetic Motor Oil for Your 2007 Suzuki Boulevard C50. AMSOIL synthetic lubricants are the solution for riders who want the most from their 2007 Suzuki Boulevard C50. They resist the devastating effects of extreme heat, even in rally or parade traffic on hot days.
What kind of oil does a 2005 Suzuki Boulevard C50 take?
10W-40 2005 Suzuki Boulevard C50 VL800 Engine Oil.
What kind of oil does a 2006 Suzuki Boulevard C50 take?
How do you check the oil on a Suzuki Boulevard C50?
How often should I change the oil in my Suzuki Boulevard?
According to Suzuki, the oil in a Suzuki Boulevard M50 / C50 should be changed every 6,000 kilometers (4,000 miles) or once a year, whichever comes first, this article and accompanying video will tell you everything you need, along with how to change the oil on your Boulevard M50 / C50 in 7 easy steps.
Where is the oil filter on a Suzuki Boulevard M50?
Instructions Remove the oil drain plug, which is easily identifiable as it is the lowest hanging bolt beneath the motorcycle. Remove the oil filler cap. Remove the oil filter at the front of the bike, between the two down-tubes of the frame.
What do I need to change the oil in a Suzuki M50?
The old oil’s gotta go somewhere! Cap wrench or 17mm socket. A stock Suzuki oil filter will need a cap wrench to be removed, but a replacement K&N one will not. We simply used an adjustable cap wrench similar to this one and it worked like a charm.
Where is the oil filler cap on a Suzuki?
The oil filler cap is on the left side of your motor, it’s where you’ll be pouring new oil into. Take it off while your oil drains out of your Suzuki. Grab your oil filter wrench and remove your oil filter. It’ll be hard at first and then ease up.